Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastron G500.A70.B.PA - TPS - Elastron Kimya A.S.

Material Data Center offers the following functions for Elastron G500.A70.B.PA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastron G datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.015 mm/mm ASTM D 955
成形収縮率, 直角 0.0115 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
破壊応力 4.5 MPa ASTM D 638
破断伸び 300 % ASTM D 638
伸び率100％弾性率 2.4 MPa ASTM D 412
伸び率300％弾性率 3.6 MPa ASTM D 412
ショア硬さA 70 - ASTM D 2240
引裂強さ 30 kN/m ASTM D 624
圧縮永久ひずみ, 22 hr @ 73 °F 18 % ASTM D 395
圧縮永久ひずみ, 22 hr @ 158 °F 46 % ASTM D 395
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 HB - UL 94
その他の特性.値単位テスト基準
密度 1120 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
納入形状.
黒
な特性
Good Adhesion, Soft Feel
耐薬品性
Ozone Resistance
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.